Cutting Machine Add-On
$189.75 - $199.75
- Weight:
- 20.00 LBS
- Shipping:
- Calculated at Checkout
Description
Made in Hutchinson, MN
Designed for:
Cricut®
Silhouette®
Brother ScanNCut®
Siser Juliet™
…and other cutting machines under 26" long and 7" tall
Slide-out shelf
Choose your option
Add-On for Cabinet
Dimensions
Reviews
Additional Info
Description
Turn your Double Cabinet into a Cutting Machine Cabinet — or make room for a second machine.
Connect the Cutting Machine Add-On to the top of any Double Storage Cabinet and it becomes a Cutting Machine Cabinet. Already have a Double Cutting Machine Cabinet and need room for a second machine? The Add-On makes that possible too. It connects to the cabinet you already own — no new furniture, no rearranging the room, and not a single drawer comes out.
Don't have a cabinet? The Stand-Alone option is a desk version that lets you slide your machine out when you're using it and back when you're not.
Slide it out to cut. Slide it back when you're done.
Both options use the same slide-out machine shelf. Pull your machine forward when you're ready to create — it extends past the cabinet or desk so 12" mats roll through cleanly — then push it back inside when you're finished.
1Slide out — pull your machine forward, ready to cut.
2Slide back — when you're done, push it back inside.
Add it to your cabinet. Or set it on your desk.
Pick the option that matches the furniture you already have. The Add-On is built to Double-width dimensions, so it fits Double cabinets only.
Add-On for Cabinet
27¾"w × 10"h × 14⅝"d
- Adds a cutting machine to a Double Storage Cabinet you already own
- Or adds a second machine to a Double Cutting Machine Cabinet
Stand-Alone for Desk
27¾"w × 10¾"h × 14⅝"d
- You don't have a cabinet but want the slide-out convenience
- Your machine lives on a desk, table, craft island, or countertop
Convert a cabinet. Or add a second machine.
Storage Cabinet → Cutting Machine Cabinet
For a Double Storage Cabinet
- Your machine gets a slide-out home on top of the storage you already have
- Every drawer stays put — you don't give up any storage to do it
Cutting Machine Cabinet → Two Machines
For a Double Cutting Machine Cabinet
- The Add-On stacks above your existing machine compartment
- Run both machines without either one taking over your worksurface
How it connects: remove the top from the cabinet you already own, set the Add-On in its place, then reinstall that same top on top of the Add-On. Nothing inside the cabinet changes, no drawers come out, and your worksurface comes back exactly as it was — 10" higher.
A worksurface you didn't have
The top of the Stand-Alone is flat and finished — stacked above your machine instead of beside it. Line up your tools, park a tray of blades and pens, or set a small lamp.
Made for the desk you already have
Nothing to mount, nothing to drill. At 27¾" wide and 14⅝" deep, the Stand-Alone sits on any desk, craft island, table, or countertop — and stays put on its own.
Built like real craft furniture
Both options share the same construction and finish as the cabinets — ¾" thermofused melamine in white, so it looks at home with the rest of your craft furniture.
Will it fit your space?
| Option | Width | Height |
|---|---|---|
| Add-On for Cabinet | 27¾" | 10" |
| Stand-Alone for Desk | 27¾" | 10¾" |
| Machine compartment | 26" | 8" |
Both options: 14⅝" deep. Add-On: fits Double cabinets only and raises the finished height by 10".
Common questions.
Which option should I choose?
If you already own a Double Storage Cabinet or a Double Cutting Machine Cabinet, choose Add-On for Cabinet — it connects right to the top of what you have. If your machine lives on a desk, table, or countertop, or your cabinet isn't a Double, choose Stand-Alone for Desk.
Will the Add-On fit the cabinet I already own?
Only if it's a Double. At 27¾" wide the Add-On is built to Double-width dimensions, so it fits Double Storage Cabinets and Double Cutting Machine Cabinets — it will not fit a Triple, and it won't fit other manufacturers' cabinets. If you're not sure which model you have, call us at 844-239-0227 and we'll help you identify it.
I have a Triple cabinet — can I still use the Add-On?
Not on the cabinet itself — the Add-On is made to Double width and won't span a Triple. Choose the Stand-Alone instead: set it on a desk, table, or countertop nearby and you get the same slide-out shelf.
Do I have to give up any drawers?
No. The Add-On sits above the cabinet rather than inside it, so it doesn't use any slots and nothing has to come out. Every drawer, paper shelf, and adjustable shelf you already have keeps working exactly as it did.
Will it make my cabinet taller?
Yes — it adds 10" to the finished height. That's worth knowing if your cabinet currently sits flush beside other furniture, because the worksurfaces will no longer line up. A Counter height cabinet becomes 44¼" tall and a Bar height becomes 51¾" — check those against your setup before you order.
Will my cutting machine fit?
The machine compartment is 26" wide × 8" tall on both options, so any cutting machine under 26" long and 7" tall fits comfortably — including the Cricut Maker, Cricut Explore, Silhouette Cameo, Brother ScanNCut, and Siser Juliet. The 1" of headroom keeps the slide action smooth. It's sized by dimension rather than brand, so a Cricut in one shelf and a Silhouette in the other works fine.
How much desk space does the Stand-Alone need?
It takes up 27¾" × 14⅝" of desk surface and stands 10¾" tall.
Should I buy this or a whole new cabinet?
If you already own a Double cabinet, the Add-On is the cheaper and simpler path — you keep all your storage and just gain a machine spot. If you're starting from nothing, or you want two machines plus a full drawer configuration in one purchase, look at the Cutting Machine Cabinet.
Does it require assembly?
Yes, and it's a short one either way — considerably quicker than a full cabinet. If you chose the Add-On, you'll also remove and reinstall your existing cabinet top as part of the install, so it helps to have a second pair of hands.
Make it even better.
Craft Storage Cabinets
Don't have a cabinet yet? Start with a Double, then add the Add-On to make it a cutting station.
Shop cabinets →
Drawers
Single, double, or triple — fill out the cabinet underneath with the right height for every supply.
Shop drawers →
Cutting Machine Cabinet
Starting from scratch? Get the machine shelf and a full column of storage in one piece.
Shop the cabinet →
Reviews (0)
Be the first to review this product.
Additional Info
- Weight:
- 20.00 LBS
- Shipping:
- Calculated at Checkout
Related Products
Stamp Case Tower Add-On
$49.75 - $60.75
Add 18 more slots to your Stamp Case Tower
Take your Stamp Case Tower to the next level of organization. This add-on cabinet drops into the two shorter shelves of your tower (IKEA-compatible...
Ink Pad Carousel Add-on
$64.75 - $82.75
More ink pad storage, same footprint
Already love your Ink Pad Carousel? This stackable add-on sits right on top of your existing Carousel, adding five more layers of storage without taking up...
Paper Holder Add-On for 8.5x11
$47.75 - $72.75
Add more paper storage to your IKEA cube
Looking for more paper storage, or want to max out your Kallax cube? The Paper Holder Shelf Add-On sits right next to your older-style 8.5×11 Paper...
12x12 Paper Holder Add-On
$74.75 - $96.75
Add six more 12×12 paper slots to your cube
Expand your paper storage without replacing your setup. The 12×12 Paper Holder Add-On gives you six extra slots for cardstock, patterned paper, or...