Multi-Cutting Machine Cabinet
$529.75 - $762.85
- Weight:
- 100.00 LBS
- Shipping:
- Calculated at Checkout
Description
Made in Hutchinson, MN
Designed for:
Cricut®
Silhouette®
Brother ScanNCut®
Siser Juliet™
…and other cutting machines under 26" long and 7" tall
Two slide-out shelves
Choose your base
Choose how it ships
Bundle bonus
Customizing your cabinet
Understanding drawer heights
Plan your layout first. If this cabinet will sit next to another Storage Cabinet, wait to attach the Command Hook until your layout is finalized.
Dimensions & specs
Reviews
Additional Info
Description
Two machines. One cabinet.
If one cutting machine was never really enough, the Multi-Cutting Machine Cabinet gives both of them a permanent home. Two slide-out shelves bring each machine forward when you're ready to create, then tuck them back inside when you're done — no lifting, no swapping, no clearing the table first. Double width, bar height, and your choice of casters, legs, or neither.
Both machines out. Or one, or neither.
Two slide-out machine shelves are what make this cabinet different. Run your Cricut and your Silhouette side by side without either one taking over your worksurface — pull the machine you need forward for full clearance, then push it back when you're finished. 12" mats roll cleanly through either shelf while cutting.
1Slide out — pull either machine forward for full clearance to cut.
2Slide back — push it back inside and reclaim your surface.
Roll it, raise it, or leave it.
One width. One height. Three ways to put it on the floor. Pick the base that matches how you work — and keep an eye on finished height if this cabinet will sit beside your other craft furniture.
With casters
Roll it where you're working
- Rooms that get rearranged — move it to the light or out of the way
- Shared spaces where the station doesn't live in one spot
- Finishes at 41¾", flush with Bar height cabinets
With legs
Lifted, furniture-style look
- A furniture-like look in a room that doubles as living space
- Easy cleaning underneath without moving the cabinet
- Finishes at 41¾", flush with Bar height cabinets
No base
Sits directly on the floor
- Standing on its own rather than beside other cabinets
- The lowest finished height of the three, at 39¼"
- A permanent spot against a wall or in a corner
Height tip: casters and legs both add 2½", bringing the cabinet to 41¾" — the same as a Bar height Storage Cabinet. Pick one of those if the Multi is going beside your existing craft furniture and you want the worksurfaces flush. Choose no base only if it's standing on its own.
Start from scratch. Or start from ready.
Buy the cabinet on its own and configure every drawer and paper shelf yourself, or choose the Drawer Bundle and get a pre-configured mix of drawers plus the inserts to organize them.
Stand-alone cabinet
You configure the inside
- The cabinet and both slide-out machine shelves
- Empty columns — add drawers and paper shelves separately
- Full control if you already know exactly what you store
With Drawer Bundle
Ready to organize on day one
- 1 single drawer per column
- 5 double drawers per column
- 1 triple drawer per column
- Drawer inserts — trays, dividers, and cups to organize them
Choose the bundle, get everything to organize it.
The Drawer Bundle ships with a curated set of organizing accessories — drop-in trays, dividers, and cups that put your supplies in their place from day one.
Tool tray
Fits inside a single drawer to organize Cricut tools, weeding tools, and other small accessories at a glance.
Slim acrylic drawer cups
Clear cups that nest inside a double drawer — perfect for pens, scissors, and the tools you reach for constantly.
Two half trays
A pair of half-width trays for sorting smaller tools, blades, and accessories within a single drawer.
Each double drawer holds 6 standard vinyl rolls.
Dedicate one drawer to the acrylic cups, fill every other double drawer with vinyl, and here's where you land:
54vinyl rolls
Build it your way.
Skipping the bundle? Don't forget to add inserts so your cabinet works as hard as your machines do. Mix and match drawers, paper shelves, and adjustable shelves to fit exactly what you store, or plan the whole thing with our Cabinet Designer.
Know your slot count: this cabinet has 2 columns with 14 slots each. Drawers use 1, 2, or 3 slots depending on height. Because both slide-out shelves sit above the columns, the usable slot count runs lower than a standard Double Bar Storage Cabinet — plan your drawer mix against these numbers rather than a cabinet you already own.
Each drawer height has a job to do.
The bundle isn't a random mix — each height was chosen for a specific category of cutting-machine supplies.
1" tall · 1 slotSingle drawerCricut tools, weeding tools, blades, pens, and small accessories.
2¼" tall · 2 slotsDouble drawerMost vinyl rolls, iron-on, transfer tape, and similar supplies.
3⅜" tall · 3 slotsTriple drawerLarger supplies, extra materials, blanks, and even t-shirts for heat-press projects.
Connects to the furniture you already have
With casters or legs the cabinet finishes at Bar height, so the worksurface lines up flush with your Bar height Storage Cabinets and extends into one continuous countertop.
Built like real craft furniture
Same construction quality as the Storage Cabinets — a durable worksurface over a ¾" thermofused melamine cabinet body, in white.
A Command™ Hook in every box
Every cabinet ships with a 3M Command™ Hook for hanging cutting mats on the side — flat, accessible, and out of your work area.
Will it fit your space?
Every configuration is 27¾" wide and 14⅝" deep. The base you choose is what changes the height.
| Base option | Width | Height |
|---|---|---|
| With casters | 27¾" | 41¾" |
| With legs | 27¾" | 41¾" |
| No base | 27¾" | 39¼" |
All configurations: 14⅝" deep · machine compartments 26"w × 8"h each · casters and legs add 2½" to the height.
| Specification | Detail |
|---|---|
| Width & height | Double · Bar |
| Base options | Casters, legs, or none |
| Slide-out machine shelves | 2 · included |
| Storage slots | 14 per column × 2 |
| Purchase options | Stand-alone or Drawer Bundle |
| Included with cabinet | 3M Command™ Hook |
| Color | White |
| Made in | Hutchinson, MN |
Common questions.
Does it require assembly?
Yes. The cabinet arrives ready to be assembled, and any drawers, shelves, or inserts you choose are installed as part of your setup. Review the instructions before you begin and plan your drawer layout ahead of time — if you chose the Drawer Bundle, that mix has already been selected for you, which makes setup quicker.
Can I use two different brands of cutting machine?
Yes. Each compartment is sized by dimension, not by brand — any machine that fits will work. A Cricut in one shelf and a Silhouette or ScanNCut in the other is one of the most common setups. Measure your machines against the compartment specs before you order.
Do I have to use both compartments for machines?
Not at all. Plenty of crafters use the second shelf for a heat press, an embossing machine, or simply as a pull-out staging surface for projects in progress. Anything that fits the compartment dimensions and slides smoothly will work.
Should I choose casters, legs, or no base?
Casters if the cabinet needs to move — to the light, to the table, or out of the way for cleaning. Legs if you want a lifted, furniture-like look with clearance underneath. Either one brings the cabinet to 41¾", matching a Bar height Storage Cabinet, so the worksurfaces line up flush beside your existing furniture. Choose no base only if the Multi is standing on its own — it sits 2½" lower at 39¼".
Should I pick the Drawer Bundle or configure it myself?
The Drawer Bundle is built for typical cutting-machine workflows — the drawer mix suits tools, vinyl, and heat-press supplies, and it ships with the inserts to organize them. If your collection looks like that, the bundle is the easiest path. If you store paper, larger items, or an unusual mix, buy the stand-alone cabinet and pick exactly the inserts you need.
How is this different from the regular Cutting Machine Cabinet?
The Cutting Machine Cabinet holds one machine and comes in two widths and two heights. The Multi holds two machines in one cabinet — Double width, Bar height — with your choice of casters, legs, or no base. If you have one machine and no plans for a second, the standard cabinet is the better buy.
What if I already own a Cutting Machine Cabinet?
If it's a Double, look at the Cutting Machine Add-On instead — it connects to the top of the cabinet you already have and gives your second machine a slide-out home, without buying a whole new piece of furniture.
What's the best way to install my drawers?
Start from the bottom up. The bottom drawer in each column sits directly on the cabinet floor — no rails needed for that one — then stack each drawer above it as you work up the column. Bottom-up keeps everything aligned and is far easier than dropping drawers in from the top.
Can I add more drawers later?
Yes. The cabinet uses the same modular slot system as the Storage Cabinets, so you can add or swap drawers, paper shelves, and adjustable shelves anytime. Mix sizes within a column and change the layout as your supplies change.
Will it match my existing Storage Cabinets?
The construction, finish, and modular system all match, so it sits alongside your existing cabinets with no color or quality difference. For the worksurfaces to line up flush you'll want Bar height Storage Cabinets and a base option that keeps the finished heights equal — casters and legs both raise the cabinet.
Can I use it as a stand-alone cutting station?
Absolutely. Two slide-out shelves, storage, and a full worksurface on top make it complete on its own — ideal against a wall or in a corner, even without other craft furniture around it. You can always add Storage Cabinets later if you decide to expand.
Not sure how it fits your craft room?
Use our free room planner to drop the Multi-Cutting Machine Cabinet — and everything around it — into your space, to scale, before you buy. No account needed.
Plan my room → Customize a cabinet →Make it even better.
Drawers
Single, double, or triple — add more or replace bundle drawers as your supplies grow.
Shop drawers →
Paper Shelves
Give 12×12 paper and cardstock a flat, visible home in the columns below your machines.
Shop paper shelves →
Storage Cabinets
Extend your cutting station — add Bar height cabinets alongside for one continuous worksurface.
Shop cabinets →
Reviews (0)
Be the first to review this product.
Additional Info
- Weight:
- 100.00 LBS
- Shipping:
- Calculated at Checkout
Related Products
Multi-Level Card Holder
$73.75 - $134.75
Display your cards on tiered shelves
The Multi-Level Card Holder displays and organizes your 4.25" × 5.5" greeting cards in style. Its tiered layout elevates each row, so even the cards in the...
