Die Cutting & Embossing Station

Reviews (9)

$695.40 - $799.50

Weight:: 50.00 LBS

Shipping:: Calculated at Checkout

Description

Manufactured in Hutchinson, MN

Die cutting & embossing, all in one station.

The Die Cutting & Embossing Station keeps your most-used supplies right where you need them — organized, accessible, and ready to create. An extended work surface plus a smart mix of drawers and paper shelves stores your Magnet Cards, plates, powders, and tools, so crafting flows from start to finish. Pairs with the Craft Island to grow your setup.

Watch the demo

See it in action.

A quick walkthrough of the Die Cutting & Embossing Station — how the storage is laid out, how the Magnet Cards slide in, and how it all comes together.

A full station in a small footprint.

The cabinet takes up just 27-3/4" of width, but the top extends to 41-1/4" — so you get a real die cutting and embossing work zone without giving up much floor space. It turns a tight corner into a dedicated station with everything in reach. Available in Counter or Bar height.

Magnet Cards, always in reach.

Slide your 12×12 Magnet Cards into the paper shelves for instant access to your most-used dies. Included label-ready paper sleeves let you sort and label cards by theme or set, so the die you need is never buried.

Hang your embossing gun.

The side overhang doubles as hanging space — use the included adhesive hook to keep your embossing gun or other tools off the work surface and ready to grab. Add more hooks to suit your tools.

Step 1 — Pick your height

Counter or bar. Your call.

Both heights carry the same storage layout and the same extended work surface — the only difference is how tall the station stands. Pick the one that matches how you like to craft.

Counter Height

Best for sit-down crafting

Height (with caster)34-1/4"

Depth14-1/4"

Cabinet width27-3/4"

Tabletop width41-1/4"

Bar Height

Best for standing or tall stools

Height (with caster)41-3/4"

Depth14-1/4"

Cabinet width27-3/4"

Tabletop width41-1/4"

The cabinet & surface

Double Storage Cabinet with special extended top
A mix of drawers and paper shelves
Casters for easy repositioning
1 adhesive hook for the side overhang

The die-cutting extras

12×12 Magnet Cards (3 packs)
12×12 Paper Sleeves for labeling Magnet Cards (1 pack)
FlexiDrawer Dividers for embossing powders
Label Holders (4 packs)

Great for

Built for die cutting day.

A designated home for everything that goes into cutting and embossing — so your tools, dies, and supplies are sorted and ready when inspiration hits.

Die cutting & embossing tool storage in one organized place.

Organizing shape, sentiment, and stacklet dies on Magnet Cards.

Keeping plates, tape, and powders in reach as you work.

Crafters who love a designated creative station that's always set up.

Available heights Counter · Bar

Counter height 34-1/4" tall

Bar height 41-3/4" tall

Depth 14-1/4"

Cabinet width 27-3/4"

Tabletop width 41-1/4"

Materials MDF frame · polymer drawers

Hook included 1 adhesive hook

Assembly Required

Made in Hutchinson, MN

Pair it with these favorites.

The station is modular and expandable — grow your dream setup by adding more of the system.

Craft Island

Expand your work surface and drawer storage with a rolling central hub.

Shop island →

Storage Cabinets

Add matching cabinets alongside the station to extend your run of storage.

Shop cabinets →

Drawers

Single, double, or triple drawers to fine-tune storage for your supplies.

Shop drawers →

Common questions.

How do I choose between Counter and Bar height?

Counter height stands 34-1/4" tall and works comfortably for sitting at a standard chair or stool. Bar height stands 41-3/4" tall and is designed for standing or tall stools. Both share the same storage layout, extended top, and footprint — the only difference is how tall the station stands.

Is this a complete kit?

Yes. The station arrives ready to set up — it includes the Double Storage Cabinet with the special extended top, a mix of drawers and paper shelves, 12×12 Magnet Cards (3 packs), paper sleeves for labeling (1 pack), FlexiDrawer Dividers for embossing powders, Label Holders (4 packs), casters, and 1 adhesive hook.

Can I expand it later?

Absolutely — the station is modular and expandable. Pair it with the Craft Island or additional cabinets to grow your setup, and swap drawers and paper shelves in and out as your supplies change.

What are Magnet Cards, and how do they store?

Magnet Cards hold your dies flat and secure. The 12×12 cards slide into the station's paper shelves just like sheets of paper, so your dies stay sorted and easy to flip through. The included label-ready sleeves let you organize them by shape, sentiment, set, or theme.

Does it require assembly?

Yes — assembly is required, and easy-to-follow instructions are included. The frame is durable MDF with high-impact polymer drawers, so it's lightweight to put together yet built to stand up to years of crafting.

Designing your whole craft room?

Use our free tools to plan the station to scale alongside the rest of your setup — before you buy.

Customize Furniture → Plan My Room →

Reviews

Reviews (9)

Susan Miller 01 10 2026

Game Changer

I was lucky enough to get this on Black Friday. It is very well made and easy to put together. It takes some time because of size of unit but it is not hard. StampNStorage did a phenomenal job especially the drawers. The smallest draw are easily holds tape runners with not arching when opening and shutting drawer. Same with embossing powders they fit perfectly. I have only two things I would change on the design. The Die Storage Shelves. They do not pull out at all. so instead of easily getting the magnetic sheet out, you have to get your fingers in there to try and grab magnet sheet and it is annoying. . If I had to rate this on a scale from 1-10 I’d give it a 9.5 just because those die shelves don’t pull out at all. Even it it pulled out even just one inch I think would help tremendously. The other thing I would add to the side or the top of the desk is electrical outlet and USBA and USBC outlet to the top or the side of the unit. That way I wouldn’t need to have cords hanging down the back of my unit. It is a shame because it is finished on the back so it would go anywhere. I know that would require hiding the cord as it needs to plug in somewhere. For now, my desk is electric so i am using the plugs on my desk unit and keeping the Die Cutting Center next to it. Oh one more thing I almost forgot. I was missing several pieces of hardware to put the unit together so we had to make a trip to Home Depot to get the appropriate screw and pegs. I have mine filled up and will enjoy this unit for many years. Thanks for designing such a wonderful piece of furniture.

Susan Miller 01 07 2026

EXCELLENT DIE CUTTING STATION

I love the die cutting station except for one thing. Where the 12x12 magnetic cards in sleeves are stored do not pull out at all. It is extremely difficult to pull out the magnet cards to use them. Also since the tabs are in increments I cannot figure how they will help me when not all of them fit in the center hole.. I think if they had the shelves for the magnetic cards pull out just one inch would make all the difference. Now I am hesitant to get any furniture with paper shelves because if it is the same situation, I will have an issue with looking through a stack of paper.Otherwise great job!

Additional Info

Weight:: 50.00 LBS

Shipping:: Calculated at Checkout

Die Cutting & Embossing Station

Description